Having a damaged roofing system can lead to a lot of problems. Roof damage is often brought about by hurricanes, mold and mildew, bug invasion, hail damage and so much more. It is a good idea to examine the roof before issues end up being larger and a lot more expensive after experiencing a serious storm. If a pest infestation is found, this is also true. Having a regular roof inspection is thought of to be a preventative maintenance job.
Here is what to look for when inspecting for roof damage:
Blistering, Buckling Roofing shingles
Any curling of the shingles is a notable symptom for damage. To check for this, look for missing shingles. Most roof shingles that are worn away would commonly be located around a smokeshaft, drainpipe or vent. More than likely this will damage the shingles on the roof if there is moisture damage.
Cracks Between Caulk Material Or Rust Spots
Most roofing shingles are molded together using caulk. It is very important to fix the issue right away before it worsens if cracks are spotted in the caulk. The most ideal period of time to check caulk for splits is in the spring time. In the summer months, cracks can become wider. It is also possible to take off the existing caulking and use another type that is made from silicone. This solution is looked at to be the most long lasting and could be easily applied with a putty knife. It is very straightforward to see gaps in caulk, even if an individual is not certified or trained to repair roof tops.
Clusters of Lichen or Moss (Mold/Mildew/Algae).
Mold and mildew and algae infestation on a roof is quite typical. Algae is very likely to growing on a roof that is built of cement. Other types of growth that can incur on a roof is, lichens, fungus, moss and much more. It is always advised to hire a professional to get eliminate algae material on a roofing system. Merely wiping away the algae is not sufficient enough to stop regrowth. If not performed appropriately, damage could be done to the shingles and reduce the life span of them. Algae can also cause spots and could be tough to eliminate if not done appropriately.
Some of the causes of lichens and moss is more of a cosmetic issue than anything else. It can be a concern on roofing tiles that are fashioned from several different material; wood, roll, asphalt, etc. There are distinctions between lichens, algae and moss. Any rubbish left on a rooftop that hold water (leaves, wood chips) can result in an overgrowth of undesirable bacteria or fungus to spread. In climates where the weather is often freezing, fracturing and damage of the shingles is often common. Overgrowth of bacteria and fungus can permeate a shingle and cause it to break. It is not recommended for the homeowner to clean them if the roof shingles(take a look at https://en.wikipedia.org/wiki/Roof_shingle) are worn out or fragile. Working with a licensed professional is the most suitable option. If any green, or black discolorations are seen on the roof, this is a pretty good indication that there is a bacteria and/or fungus growth on the roof shingles. Pressure washing and brushing the roof is a pretty good choice for removing moss and should be done in a gentle method. Trimming back trees so that the roof can be exposed to additional sunlight is a practical solution for neutralizing fungus overgrowth.
Damaged Rubberized Boots Surrounding Ventilation Pipes.
The 1st step to locating a rooftop ventilation pipe leak is to try to find water spots on the ceiling. This stain usually has a dark or light yellowish complexion to it. The first step is to locate the lower end of the vent pipe. This would be located directly above the drywall ceiling. The ceiling is usually covered by fiberglass insulation. The source of the water drip will be located upon an inspection of the PVC through the roof that is nearby the ventilation boot flashing. Substantial downpour can have adequate tension to penetrate through the wall structures into the ceiling (triggering the discoloration). Look for torn roof shingles if checking for decay. Roof fractures can also be triggered by UV rays (which is why home-owners will often find gaps in their tiling in the summer time).
Missing Chimney Cap.
To check if there are any issues with the chimney cap, look out for any rusting. When examining for a missing or damaged roof cap, search for caps that are dripping, missing, too flimsy or damaged. Caps that are constructed from metal should also be sealed in order to avoid water leakage. Water that makes its way inside the chimney can destroy the structure. If using a professional to handle the problem, this will only increase maintenance fees. A missing chimney cap can also be brought about by hail damage. It is quite simple to try to find a cap or fireplace damper that has corroded away; in many cases, there will be heat loss.
Think you might have roof damage? Contact qualified and experienced roofing contractors and set up a free roof inspection orlando fl area.